Search models, users, collections, and posts
Metal Gear Solid - Solid Snake Hueforge
IP Report
Print Profile(2)
0.08mm layer, 2 walls, 100% infill
Designer
6.3 h
1 plate
200x200mm 0.08mm layer, 2 walls, 100% infill
Designer
4.7 h
1 plate
Open in Bambu Studio
Boost
316
578
96
54
343
203
Released
Description
Boost Me (for free)
Project: Metal Gear Solid Snake.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 240x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA Elegoo Red Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to White
At layer #12 (1.04mm) swap to Yellow
At layer #15 (1.28mm) swap to Red
At layer #17 (1.44mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (96)