RMFC v1.5 - Rapid manual filament changer

For those without an AMS-lite who want a way to quickly change filaments on the A1 mini (this is currently not compatible with the A1 but an A1 version is on the way)

Allows for 4 filaments still in their dry boxes to be ready to load into you printer via this handy print.

Load upto 4 filaments into the lower Bowden tubes passing through into the top tube to the print head. Now when you want to change a filament just take off the cover and pull back the filament 1 span of the box, this will clear the hot end. Then when requested load the new filament. This prevents you having to pull the old filament all the way out.

This is a rework of my other design - https://makerworld.com/en/models/615602#profileId-539020

• Key changes are this version uses M6 connectors to prevent the tubes creeping past the connector and into the box.
• The design is now screwless

Unloading filament -

Loading Filament -

If there are any other changes/ improvements you would like to see, please let me know as they may be added to future design versions.