Print Profile(6)
Bill of Materials
Description
Lighter Uzi for Bic EZ Reach Lighters
With this mod you can give your normal Bic lighters a unique and fun twist.
You will need 6x 3x12mm screws to build it.
The ones I used are linked below.
One of the screws is used for the trigger mechanism and needs to be shortened to about 7mm.
Insert the pin, trigger mechanism and lighter
into one of the case halves and close it up.
Finally, screw the two halves together.
The supplied print profile is set to print by object. This means that you only have to load your wanted filament in the AMS and assign it in the slicer, both colors will be printed on one build plate.
Otherwise, you can switch back to print by layer printing.
Boost Me (for free)
If you like my work and want to support me, a Boost is greatly appreciated!
Membership
Interested in a commercial license? Check out my membership!
Check out the other Lighter/Clipper builds I made!
 | 
|
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (564)