Mid Century Modern Sci-Fi light, star wars
Print Profile(3)
Bill of Materials
- x 1:
Description
This unique modern-century light adds soft, diffused lighting to any room. Inspired by geometric shapes, it is as interesting to look at as it is functional. This model requires no support and can be assembled with minimal parts.
Non Printed Parts List
- 3x Threaded Inserts: https://a.co/d/hFYLp4n
- 3x M3x10 Screws: https://a.co/d/bTYsudC
- Candelabra Socket and cord: https://a.co/d/clwrofx
- Candelabra LED: https://a.co/d/8MENl8u
Assembly Instructions
Print all the parts in whatever colors you like. I chose Brown and an almond-yellow color.
Use a soldering Iron to press the threaded inserts into the top.
The inserts should be flush. A trick is to press the inserts in 80% and then use a flat surface like a table to top to push the insert in the remainder of the way.
Next Screw the 3 pieces together, and push the Light base into the bottom of the light
Install Feet on the bottom
Install the bulb
Enjoy
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)