KATANA "ZENITSU" (Inspiration)
Print Profile(1)
Description
Boost Me (for free)
Thank you for your support
Membership
Commercial Membership Freely commercialize the physical designs published on; https://makerworld.com/en/@YAKUZA3D
3D MODEL DESCRIPTION
Zenitsu's folding katana from Demon Slayer - Kimetsu no Yaiba
I tested it in PLA+
0.4 Hotend, 0.2mm layer, 2 walls, 15% infill
If you have trouble printing the blades, you can add an inner and outer raft for later removal
Recommendations:
1 Close blade by blade from bottom to top holding the lower pommel and not the handle, this will help durability
2 Be careful with the tip
3 Do not open with excessive force, it is not necessary
For painting I recommend acrylic paints and then a coat of resin over the painted part to withstand friction
ASSEMBLY VIDEO
https://vm.tiktok.com/ZM6faof5t/
https://www.tiktok.com/@makers.m3d/video/7319250267549994246?_t=8mmUAXEjqcg&_r=1
PROFILE
https://cults3d.com/es/usuarios/Makersm3D
NETWORKS
https://linkfly.to/Makersm3D
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (119)