Bambu A1 enclosure cooling with fans integrated.
Print Profile(2)
Description
This is a remix of a very good model for cooling the A1.
!!! VERY IMPORTANT !!!
!!! THIS IS THE ONLY WAY TO ENCLOSE Bambu lab A1. !!!
I added two 4010 fans, integrated in the duct pipes. the one will blow cold air from the one side.
the other will suck the hot air from the motherboard, out from the enclosure.
the bambu A1 don't have a motherboard fan, so if you close the printer, the board will die way faster than normal. Won't die at the moment , but wiil in the fututre. The bambu A1 mini has a fan and it can be closed easily, but A1 not.
I am thinking of adding a one or two temperature sensors and some fan controllers, and panel for the temperature reading and controlling the fans, also a chamber heater and nevermore filter. follow me for more projects. Just gettin started.
for this project you will need two 4010 fans. you can power them from second ams connector, or with additional power suply.
This remix is based on
License
Comment & Rating (133)