Auspicious Cloud Purple Gold Gourd (Hollow Version)

Auspicious Cloud Purple Gold Gourd

• Based on the Auspicious Cloud Gourd released some time ago (Auspicious Cloud Gourd from dadabu - MakerWorld), enlarged by 300% and hollowed out the main body
• Added a newly designed cloud pattern lid, the lid has a hole with a diameter of 4 for tying a rope
• Recommended printing material: PLA support (PETG support will be a bit harder to remove, but it has been tested and the print quality is just as good)
• Size: 105X105X205mm(length X width X height), can be scaled according to your needs, pay attention to the assembly error of the lid after scaling
• Capacity: approximately 500ml
• In order to reduce the print failure rate, support has been added to the bottom and the large arc overhang in the middle, the support setting is relatively dense, and it takes a little more care to disassemble, you can use a Bambu hotbed scraper to go in and scrape around the bottom support, and then you can remove the whole thing, the same goes for the support at the waist, some details are recommended to be slowly repaired with a sprue cutter, if there are rough parts, you can polish them slightly, thank you for your understanding
• Other: The download section also includes the solid and hollow gourd STL files that have not been disassembled, and you are also welcome to download them and make your own creations; Later, according to the needs of everyone, we can also provide different forms of segmentation (such as waist half segmentation) and different assembly forms (such as thread assembly) of the Auspicious Cloud Gourd

3D Printing Tips and Preparation Notes

(Most of the models released by creators have been tested and can adapt to all models. In many cases, if there are printing problems, you need to check if your printer and consumables are normal. This is a skill that needs to be learned when playing 3D printing. If you have any questions, you can also discuss them actively in the comment section, which is also the meaning of building such a community)

I have explained some precautions below, and if you have any more questions, you can ask the customer service or check the Bambu Wiki, where you can learn a lot Printing quality and solutions | Bambu Lab Wiki

• Make sure the build plate is clean, it is recommended to clean the build plate regularly! The grease residue on your hands after touching the build plate will greatly reduce the adhesion of the print, and the debris from previous prints and tiny residue from the print will also affect the print quality of the first layer, thus reducing the yield.
• Pay attention to the drying of the filament, which will greatly affect your print quality and print experience! Filament that has been stored for a long time will inevitably absorb moisture, if stringing occurs, it is recommended to ask the manufacturer for the drying parameters to dry the filament, also most manufacturers' filaments are not dried when they leave the factory, so the filaments we have just unsealed are still a little damp, and it is also recommended to dry them before use.
• If you are using filament from a new manufacturer, it is recommended to print it for the first time immediately calibrate the filament flow rate, and modify the calibration coefficient, which will greatly affect your print quality and is a necessary process to make the new filament adapt to your printer.
• If you encounter the problem that the print suddenly becomes poor quality and the yield is low, check if the nozzle is clogged, and you can also try recalibrating the printer.
• Print at the recommended print speed in the model description. The quality of the overhang is directly related to the print speed, a suitable speed (too fast or too slow is not good) can allow the material to have more time to cool and shape when it is deposited.
• Set the hotbed and nozzle temperature according to the different materials. Too high or too low a temperature will cause warping, layer deformation or adhesion problems, which will affect the print quality and success rate.