Search models, users, collections, and posts
Cover for IKEA PAX holes
IP Report
Print Profile(5)
0.16mm layer, 2 walls, 15% infill
8 min
1 plate
100 pcs - 0.16mm layer, 2 walls, 15% infill
50 min
1 plate
500 pcs - 0.16mm layer, 2 walls, 15% infill
3.7 h
1 plate
50 pcs - 0.16mm layer, 2 walls, 15% infill
29 min
1 plate
Click to see more
Open in Bambu Studio
Boost
1308
4907
227
65
2.6 k
1.6 k
Released
Description
The covers can simply be printed in the color of the cabinet using any filament (preferably PLA).
The covers have a diameter of ø4.9mm in the model, which worked best for me. If desired, the diameter can easily be adjusted in the Fusion 360 file.
The ø4.9mm diameter worked best for me, but if the parts don't hold tight enough, you can also use the ø5.0mm file.
You can also adjust the diameter of the cover as you wish and generate an .stl file  |
Important: The covers should be printed without a border, otherwise they will be time-consuming to remove:
Boost Me (for free)
If you liked my design I would be very happy about a boost
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (227)