Print Profile(4)
Description
Halloween - Jack Skellington Decoration
This Jack Skellington decoration showcases the Pumpkin King in his classic suit, standing tall against a spooky backdrop of a haunted house, full moon, and flying bats. Flanked by grinning jack-o'-lanterns, this monochromatic design captures the eerie yet charming essence of Jack, making it an eye-catching addition to any Halloween display.
The model is 100mm x 175mm in size.
Aimed for a "3D Look” with Jack`s deeper layers.
ALSO CHECK OUT:
Halloween - Pumpkin Bookmark set
Halloween - Pumpkin Sign/ Decoration
Halloween - Witches Bookmark set
You will get the best results using a 0.2 nozzle, but a 0.4 nozzle works great aswell. The published pictures are printed with a 0.4 nozzle.
This model allows printing with colour changes at layers, saving a lot of filament.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm !
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Gray
At layer #20 (1.68mm) swap to Charcoal
At layer #30 (2.48mm) swap to Ivory White for the rest.
After printing use a lighter/ torch, by quickly passing the printed parts you will get rid of the tiny stringing on these type of prints.
Print Profiles for AMS/ No AMS users available.
Further Halloween Theme Sets in the making.
Please Comment and Rate
A Follow is highly appreciated <3
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)