Mushroom Kingdom Bookmarks - Hueforge

This is a triptych of bookmarks I made in Hueforge using the Color Aware feature. This is best printed with a .04mm layer height for the best gradients and details.

Project: Mushrooms v2 Right.hfp

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

The Model is 146.86x441.01mm in size

You may print at higher layer heights below the Min Depth of 0.24mm

The Max Depth is 1.9mm and the Actual Depth is 1.9mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Red Transmission Distance: 4

PLA BambuLab Basic Orange Transmission Distance: 5

PLA Kingroon Yellow Transmission Distance: 7

PLA BambuLab Basic Jade White Transmission Distance: 5

PLA+ Esun Forest Green Transmission Distance: 2

PLA BambuLab Basic BambuLab Green Transmission Distance: 2

PLA Anycubic Tropical Turquoise Transmission Distance: 3.6

This print uses 8 unique filaments

Swap Instructions:

Start with Black

At layer #2 (0.28mm) swap to Red

At layer #7 (0.48mm) swap to Orange

At layer #8 (0.52mm) swap to Yellow

At layer #9 (0.56mm) swap to Jade White

At layer #16 (0.84mm) swap to Black

At layer #17 (0.88mm) swap to Forest Green

At layer #19 (0.96mm) swap to BambuLab Green

At layer #23 (1.12mm) swap to Yellow

At layer #25 (1.2mm) swap to Jade White

At layer #30 (1.4mm) swap to Black

At layer #32 (1.48mm) swap to Tropical Turquoise

At layer #36 (1.64mm) swap to Jade White for the rest.