D4 KITCARD V1 - Free 3D Print Model

Search models, users, collections, and posts

Tjoene

Toys & Games>Board Games

IP Report

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

V1 duo color no frame 0.2mm layer, 2 walls, 15% infill

Designer

15 min

1 plate

5.0(7)

V1 single color no frame 0.2mm layer, 2 walls, 15% infill

Designer

10 min

1 plate

5.0(5)

V1 duo color with frame 0.2mm layer, 2 walls, 15% infill

Designer

21 min

1 plate

4.8(4)

V1 single color with frame 0.2mm layer, 2 walls, 15% infill

Designer

12 min

1 plate

5.0(1)

Open in Bambu Studio

Boost

158

212

105

Released

Description

Greetings fellow adventurers.

Whether you need an emergency d4 or a quick little extra to put in a celebratory card for a fellow DnD’er, the “D4 kitcard” has you covered.

This d4 (V1) measures approximately 17.5mm on the edge.
The print profiles with frame have been optimized to provide a clean and easy break between the pieces and the frame. Due to this it is recommended to let the print cool off before removing them from the buildplate.

Assembly Instructions (no glue required):

The joints of the pieces feature a slight dovetail design and require a bit of pressure to push into place. Once assembled it is not recommended to disassemble again.

1. Carefully remove each piece from the frame.

2. Gently bend the faces of the both piece inward.

3. Move both pieces into eachother as shown below and first connect one side and then the other, making sure the numbers in the corners align.

And there you have your new D4!

Options:

In the print profiles you will find the following options:

duo color with frame
single color with frame
duo color no frame
single color no frame

Materials:

All these were designed and printed with PLA.

Comments on previous kitcard dice have pointed out that PETG has good results as well, and mixed results with ABS.

Additionally PETG doesn’t leave the fold lines you get with PLA.

This does require some further testing, so if anyone tries it with PETG or other materials, please leave a comment.

Upcoming:

Smaller d12 and d20 are in the make for a uniform “full dice set” kit card.

Comment & Rating (19)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.