Bunny Egg Lamp Lantern Handle
Print Profile(3)
Description
This lantern handle is designed to fit the Rabbit Egg Lamp. It is printed horizontally, with less time and material required. The surface features a rounded design, providing an excellent feel. The handle is approximately 21 centimeters long. The model was inspired by asianlth's Lantern handle. I modeled the handle based on the outline of NUKDDD's Easter Rabbit Egg Lamp, and it is also compatible with 路萤3D打印's Fat Rabbit Small Lantern Series. To prevent warping, I added a skirt to the ring. Please adjust the distance between the skirt and the model, as well as the ironing flow ratio, according to the material you are using. The material I used in the picture is Dianwei's skin-colored matte PETG. Please fine-tune the parameters based on the material you use. It is recommended to use PETG to ensure structural toughness. PLA has not been tested yet.
Strongly recommend using the V1.1 version of the print configuration, as it provides a better surface finish. The models for the two print configurations are different.
Update Notes 2024.9.17
V1.1 version
The diameter of the lantern hanging ring has been slightly reduced, and the hanging ring has been thickened to improve the visual ratio. The top pattern in the print configuration has been adjusted to eliminate local extrusion problems. The original skirt at the hanging ring has been reduced. The skirt helps to ensure the hanging performance of the ring, so please try to keep it.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)