kcskrafts

cover

IMG_1851.jpeg

IMG_0076.png

Main

plate_1.png

2024-09-18_081e5e864aa42.png

IMG_1850.jpeg

0.16mm layer, 2 walls, 15% infill

Right

Left

plate_2.png

IMG_1907.jpeg

IMG_1908.jpeg

IMG_1909.jpeg

When you leave your tools out in the sun, you might need to make a step up from PLA to ASA. This profile also includes a second plate that will let to print a mirrored version for either left or right handed bit storage! Make sure to throw some glue down on your plate to ensure the ASA doesn't curl up from the build plate during printing.<ul><li>0.16mm layer height</li><li>2 walls,</li><li>15% infill</li><li>supports are needed</li></ul>

ASA, mirrored plate, 0.16mm layer, 2 walls, 15% infill

not_found

IMG_9838.JPG

Added holes for 5x2mm magnets to each bit to improve retention. Added supports to the mounting studs for a cleaner look.&nbsp;Insert magnets at the pause with a drop of superglue.&nbsp;Note: Polymaker PLA in Matte Army Red is an excellent color match to the M18.

Magnetic - 0.16mm layer, 2 walls, 15% infill

Here is a simple bit holder that attaches to your Milwaukee M18 Drill and Impact Driver, replacing the stock bit holder (works with the same screw too!).

Rack'em Up - Milwaukee M18 Bit Holder

ASIA

Print Profile(3)

Description

Comment & Rating (151)

License

Related Models