Search models, users, collections, and posts
Tactical Combat Karambit
IP Report
Print Profile(2)
0.2mm layer, 6 walls, 25% infill
Designer
1.6 h
2 plates
Honeycomb pattern (no top / bottom)
42 min
1 plate
Open in Bambu Studio
Boost
1112
2840
176
31
3.8 k
2.5 k
Released
Description
An minimal yet elegant combat Karambit knife. The Finger cutouts use the average male ring size of 20mm diameter.
Scale model as needed using your ring size in the chart below.
| Ring Size (US) | Diameter (mm) | Scale Factor |
|---|---|---|
| 5 | 15.7 | 0.785 or 78.5% |
| 6 | 16.5 | 0.825 or 82.5% |
| 7 | 17.3 | 0.865 or 86.5% |
| 8 | 18.1 | 0.905 or 90.5% |
| 9 | 18.9 | 0.945 or 94.5% |
| 10 | 19.8 | 0.99 or 99% |
| 11 | 20.6 | 1.03 or 103% |
| 12 | 21.4 | 1.07 or 107% |
| 13 | 22.2 | 1.11 or 111% |
| 14 | 23.0 | 1.15 or 115% |
If there are any knife designs or other tools or cosplay props you would like to see, please message me an image and i will design it.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (176)