TerTerro

cover

20231115_175157.jpg

20231115_175206.jpg

20231115_175215.jpg

20231115_175220.jpg

plate_1.png

20231115_175107.webp

plate_1.webp

20231115_175157.webp

20231115_175206.webp

20231115_175215.webp

20231115_175220.webp

Printed standing up with brim and small support on side for stability.

0.2mm layer, 2 walls, 10% infill

Erok

Screen Shot 2024-07-11 at 12.36.48 PM_(1).png

2024-07-11_7508bad88a448

PXL_20240711_145553929.jpg

PXL_20240711_192944864.jpg

Strength Modifier ProfileConnectors: Modifiers for 4 walls, 25% gyroid infillBody: 15% gyroid infill 3 walls gyroid&nbsp;Like others the end connector snapped when my kid tried to remove it at a bad angle. I've increased the model walls to 3 and set the infill to gyroid for strength. Also set custom modifiers to increase the wall and infill count at the connectors as well as inc

Strength Modifiers - 0.2mm layer, 3&4 walls, 15&25% infill

markos

IMG_0295.jpg

IMG_0294.jpg

IMG_0297.jpg

IMG_0296.jpg

Track is placed horizontal on the plate so it can be printed also on A1 mini.Please be aware that it takes some time and effort to remove all supports. The easiest method for me was using a flat screwdriver.

0.2mm layer, 2 walls, 10% infill, A1 mini, horizontal

zimu

2023-11-15_20b9d6b053a1d.webp

Original design great but the lack of skirt and decent infill needed updating to make it print more universally well. &nbsp;Avoids the bed adhesion issue many were facing, or the print quality issue if laying down on its side.  This one just works.

Stable print with skirt

Coarse

IMG_2895.JPEG

Horizontal-print with easily detachable tree supports-up to six on ne P1S plate &nbsp;0.28mm layer, 2 walls, 15% infill

Horizontal_strong_treesupport

Riky526

PXL_20260125_163321239.jpg

Take more time to print but less time and stress for remove supports, comes out very easily!

A1 mini PLA + PETG support: 0.2mm layer, 3 walls, 15% infill

Train Tracks compatible with Brio/Ikea Rising track, to help elevate the tracks. Double sided, print standing with auto brim and small support to not fall over on side (Check print profile for optimal printing). This way it requires minimal support and less filament to print. Double sided makes it perfect to use.

Print Profile(6)

Description

Comment & Rating (359)

License

Remixes (3)

Related Models

Train Tracks compatible with Brio/Ikea - N style