toilet paper holder for standard heater
Print Profile(1)
Description
This paper holder is designed and tested for a custom fit make sure that it would fit by printing fit fest on the first build plate to avoid wasting filament :) You can choose between 2 orientations, just delete the other one in the print profile.
In case you have a “ladder” heater in your bathroom, check my other models :)
The radiator should be 62 mm thick and should have a rim suitable for clicking the holder in. Again use fit test. The clicking in is a bit tricky, you have to find a good angle.
I purposefully lowered the printing speed for a better result, increase at your own risk.
Test printed with PETG. PLA is not recommended, because of the heat from the radiator.
Boost Me (for free)
this model took me a lot of time, I would be very happy for your boost.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)