Softopper Side Release Buckle - Female to Female
Print Profile(1)
Description
Created this to move the annoying dangling clips out of the way of loading and as a visual eyesore while driving. I didn't want to remove them as they are used for keeping the back flap open when needed but when not in use they just hang in the back.
Created a side release buckle that had two female sides for the Softopper shell. This is a basic recreation of the existing side release buckle from the factory. I used Bambu Black ASA in hopes this will withstand the California heat and the elements in the back of a truck, but I am sure you could replace with either PETG or ABS.
Through testing I found these settings work the best using a P1S
- Default preset 0.20mm STRENGTH @BBLX1C
- Print at approx 45 degree angle with supports. This helps with strength
- Add a Brim (outer only 10MM to ensure the print isn't going anywhere)
- this might be overkill but also a Raft (3 loops) as my safety net.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)