DJI NEO Camera Protection
Print Profile(3)
Description
Additional camera protection to clip on for the DJI NEO (similar to my model for the DJI Avata 2)
– Tool-free assembly without screws
– Includes protective cover, as the original DJI NEO gimbal protection cannot be used
– Can be combined with my DJI NEO Guard, but this will increase the weight.
(First attach the camera protection, then the Guard)
– Try to keep the field of view as free as possible
(with the camera tilted down as far as possible, some is still visible, less was not possible due to stability)
– When removing the tree support after printing, it is best to cut it in the middle.
Assembly:
First clip in the upper area of the drone, then below.
To remove, first below, then above with a slight wiggle carefully pull off.
If the cover is too loose at the top/ bottom, you can gently warm the curves and press them together slightly on the opposite side, closing the C-shape a little.
Boost Me (for free)
A boost is always welcome
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (295)