Blade for plastic Bed Scraper

Here are the self-printable plastic blades
When I saw a cool scraper here on MakerWorld
I was not yet aware of the replaceable plastic blades available on Amazon
And I wondered why the blades couldn't be found here on MakerWorld
I also saw many comments for the scrapers where users were disappointed that the blades were not available for self-printing
Therefore, here is a model from me

Have fun

Info:

Use a smooth build plate for the blades to achieve sharp edges on the blade

I printed the blades using the following filament brands and build plates:

PETG - Sunlu white - Smooth PEI Plate without adhesive
ABS - PrimaValue black - Wham Bam PEX without adhesive
ASA - Eryone black - Wham Bam PEX without adhesive

PA12 - Fiberlogy white - G10 without adhesive

Note:
It's quite possible that filaments from other manufacturers might result in different model dimensions

Some users have reported that PETG-CF is not suitable for the blades, as they can break easily

I would also advise against printing the blades with PLA, as they wear out very quickly