Tyrannosaurus Rex Skeleton 250% Reinforced Tyrannosaurus Rex Skeleton

This is a remix of the Makerbot Tyrannosaurus Rex skeleton.
I scaled it up to 250%, which is the largest size that Bambu Lab can print.
Overall length: 140cm/55in.
Height: 60cm/24in.
About 2.6kg of filament is required.

In addition to scaling it up 250%. I also made the following adjustments:
The original size is scaled up, and the lower jaw is fixed to the upper jaw loosely. I adjusted it.
The 4 links of the pelvis will also become loose. I scaled it up.
The base is split.

The first time I printed it with PLA skin color material. The head weighs about 1kg. It’s too heavy. As shown in the picture. He can’t stand up. The middle connection is broken! I am trying to reprint it with matte PETG material. It’s still printing. I will continue to adjust this model later!

This is an adaptation of the Makerbot's Tyrannosaurus Rex skeleton.
I scaled it up to 250%, which is the largest size that Tuozhu can print.
Overall length: 140cm/55in.
Height: 60cm/24in.
About 2.6kg of filament is required.

In addition to scaling it up 250%. I also made the following adjustments:
The original size is scaled up, and the lower jaw is fixed to the upper jaw loosely. I adjusted it.
The 4 links of the pelvis will also become loose. I scaled it up.
The base is split.

The first time I printed it with PLA skin color material. The head weighs about 1kg. It’s too heavy. As shown in the picture. He can’t stand up. The middle connection is broken! I am trying to reprint it with matte PETG material. It’s still printing. I will continue to adjust this model later!