yusuffles

cover

20240929_174948.jpg

20240930_182503.jpg

20240929_175004.jpg

20240929_175024.jpg

plate_1.png

2024-09-29_c0a7dcf76f4c7.jpg

With Brims for ease of printing&nbsp;

0.2mm layer, 2 walls, 15% infill Gyroid

20240930_182521.jpg

Same version but striped have fun printing!

0.2mm layer, 2 walls, 15% infill Gyroid Multicolor striped

ToonCube

20241019_103038.jpg

20241019_103014.jpg

This is a scaled down print profile of the original where the slug is scaled 50% to half size. This slug is now 15cm long when fully printed. This print profile uses a lot less filament too which makes this slug giftable to more people!&nbsp;&nbsp;In my picture, the slug is sitting ontop a 500ml (16 fluid oz) disposable water bottle.

Cute Convenient 15cm (Half Original Size) Slug!

user_3764121982

1000003568.jpg

1000003567.jpg

20260211_161125.jpg

Does not fit on the mini, don&#39;t rescale or it will mess up the layer painting. Max size for A1, make sure your plate is resting against the built in stops and centered.  . I noticed the painting tool couldnt fill in the polygons on the layers correctly, so all painting is done in the slicer through filament change commands. 1.1kg 1d20h print time. Acceleration reduced by height. I experienced some y axis layer shift this dude is heavy. Tensioning your y axis before printing is recommended. May have just been my luck with the recent patch that fixed a problem with short distance acceleration. The pattern of the painting hides it really well anyways.&nbsp;Supports painted under the eye stalks, I went with 0 interface, 0.2 top z and z overrides xy to match the slicers overhang line type better and hit all the overhangs except for a few that got too close. I had a bit of the print stick too well, but peeled away smoothly otherwise. You could try an xy spacing of 0.25 if you want.

167% 3 Color Pattern

Enlarged Curled up Friendly Slug

I love slugs but so do you and thats why i bring you a 30CM (11.8 inches) articulated slug, Since my other remix proved that it is really hard to print i optimized and added sturdy brimsNOTE If you trust your printer and you have 3dlac and an enclosure i believe you would be able to print without the brims ON OWN RISKsince it is a big model and it does use alot of filament, I still recomend you print with the brim and just remove it it takes 5 minutes to spare you from wasting alot of filament. please post your makes and message me privately if you can&#39;t seem to print it i am very determined to help everyone! <boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you boost me you help me be more productive and active at posting/making the models you like!! also i would really want the bigger A1 ;-;</boostcontent></boostme>

30CM Fidget slug toy A1Mini

ASIA

Print Profile(4)

Description

Comment & Rating (187)

This remix is based on

License

Related Models