theJJM

cover

plate_1.png

o.0jack

103244_938b4c77-ffea-46ed-835d-e54827306520.webp

103242_0_d3b3a0c7-33a9-4ea2-bd51-580f608afc5c.webp

103243_0_51df79a2-a896-4bc7-8d70-45d1a08dddb3.webp

Printable: 4.5 stars (1-5) Tip:suggestion speed 50%Add A1 mini 0.24mm layer, 2 walls, 15% infill

0.24mm layer, 2 walls, 15% infill

zackza

photo_2024-06-24_19-14-37_53223005-aa01-4919-9eb7-dc6d17460aca.webp

photo_2024-06-24_19-14-41_0c522110-e912-4b57-bec7-54394b294bab.webp

photo_2024-06-24_17-11-48_16e20973-abc8-4cac-9c0c-e3ac6ed1030d.webp

plate_1.webp

Same settings as before 0.24 and normal supports BUT I CUT the bottom off, a circumcision of the bottom of the ocarina now flat and branded with a simple triforce negative space.&nbsp;&nbsp;The bottom of the ocarina should look cleaner now, but with a reason , now it has a built in stand with a triforce logo.&nbsp;

Flat Bottom, 0.24mm layer, 2walls, 15%infill, self-balancing

Mr. Basti

WhatsApp Bild 2024-04-21 um 15.43.58_c45274fc_59d708c4-4f11-4cb0-a7bc-79e1276c575c.webp

made some custom supports and changed infill and layer height

0.18mm layer, 2 walls, 25% infill, custom supports

7 Ocarinas

5 Ocarinas

plate_2.png

Template - ONLY MAKE COPIES

plate_3.png

kandlerb

20240215_092435_0ad8c50b-4f23-41d1-b61e-efab0af2eda1.webp

plate_2.webp

plate_3.webp

20240215_092501_d9a829a1-ba88-467f-a7ca-bd611f55b7f8.webp

20240215_092443_68fd9a77-3d23-4080-8e8c-a49823e7cf5f.webp

Took the file that was uploaded and went through and figured out the sizing for the different keys! I also included the template Ocarina (If you want to add a name or change the font, etc.), just make a copy of it and then edit the copy, Bool it, and you should be good to print.  I've included my print settings in the file so hopefully it works well for everyone else. Enjoy!

the that guy

2024-11-04_ca7ceb04f9b2c.jpg

I printed this on the A1 with 100% infill, a 2 walls and tree supports. when applying the supports make sure that there are not to many thick supports on the inside of the print. if there is it is almost impossible to get them out. I would recommend using a raft tor extra surface area, this reduces wobble and improves print quality. the start with the round bottom is hard to do smoothly so I sanded it down after would but the raft helped a lot. &nbsp;

0.2mm layer, 2 walls, 100% infill

Updated 12 Hole Ocarina

Imported from Thingiverse I am not the original author. I will make a profile for it to be printable via the phone app. 12/7/2023: Updated a print profile to have only supports on the build plate. Imported the <a target="_blank" href="https://makerworld.com/en/models/86354#profileId-92262" rel="nofollow noopener">Ocarina Stand</a>.

Print Profile(5)

Description

Comment & Rating (533)

This remix is based on

License

Remixes (1)

Related Models