Dino Lamp for kids

Solo standing dino led lamp.

Step 1: print the dino in the colour you want

Step 2: print the white files (dino white and spikes)

Step 3: install LED lights/controller

Step 4: enjoy!

These are the settings I use for best results (at 100% scale and with a 0.4mm nozzle)

• Layer height 0.15mm (first layer 0.2mm)
• 3 perimeters
• 30% rectilinear infill
• Slow down the first layer print speed (30% of default)
• No brim or support material