Desktop Vertical IKEA Pegboard V2
Print Profile(12)
Description
Boost Me (for free)
For situations where more than three layers are prone to bending, an aluminum profile desktop mounting solution can be used.https://makerworld.com.cn/zh/models/1605085
This is mainly designed for tables not placed against a wall, allowing pegboards to be placed on the desktop and expanded as needed.
For stability, the pegboard thickness is designed at 5mm, with connection holes reserved on both sides, allowing selection based on desired stability.
- The minimum unit is one pegboard and one base, along with several connectors.
2025.2.26 Upgrade
Upgrade to V3 version https://makerworld.com.cn/zh/models/980288#profileId-1000662
Accessories are compatible with V2 (this version); click the link above for details.
2024.10.31 Update
Added front and rear screw holes for the 240mm base to secure connections between bases. The 160mm version was also updated on 12.30.
Use M3x12 screws with nuts.
2024.10.17 Update
Added an accessory for cable routing and management https://makerworld.com.cn/zh/models/564025#profileId-492000
If needed, please check it out.
2024.10.14 Update
To reduce splaying at the front ends of the two bases, a fastening accessory has been added.
The front end can be clamped https://makerworld.com.cn/zh/models/557919#profileId-483885
2024.10.11 Update
Added a print profile: "Back slotted, reducing thickness to 3mm," with slots below the holes on the back to reduce thickness and accommodate thinner accessories.
Note: Due to the slot opening, pay attention to the installation direction; the opening should face downwards and be on the back.
2024.10.11 Update
Added a print profile: "3mm thick plate and base," which includes 3mm thick plates and bases in two sizes (240mm/160mm).
The screw length for 3mm thick plates can be reduced by 2mm accordingly.
2024.10.8 Update
Added two compatible hangers; those who need them can download them.
Hook: https://makerworld.com.cn/zh/models/544556#profileId-473000
Nippers holder: https://makerworld.com.cn/zh/models/544700#profileId-473148
2024.10.6 Update
Added 160mm wide pegboard and base to the print profiles to accommodate A1 mini printing; connectors are universal.
Other options:
- Pegboard with pins, which can act as a stopper when installed onto the base.
- Bases on both left and right sides have added stopper strips.
The above two items are not essential.
Other required accessories:
- Base and pegboard: M3*15 screws and nuts.
- Between pegboards: M3*12 screws and nuts.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (133)