Prosperity Ox and Fortune Ox (a pair)

Prosperity Ox and Good Fortune Ox (a pair)

Wishing everyone good fortune and abundant blessings

Size: The model is preset to be 50mm in height and 97mm in width. The base is also included in the printing configuration for you to print. You can scale the size as needed. Scaling requires settings in the desktop slicer software

Support: Support and variable layer height have been preset. The layer height is 0.2mm, and you can print directly from the mobile APP.

For a finer printing effect, you can set a lower layer height in the desktop slicer software ( when a pop-up appears, remember to select "Use modified value" ). The printing time will increase accordingly.

Filament:

The actual photo uses Bambu PLA Silk Golden 13401 Click to purchase

Homepage has other prosperous oxen, welcome to print them

Feel free to leave a comment if you have any questions

3D Printing Notes
In my experience, the following points should be noted for daily printing:
1. Clean the printing plate regularly! If possible, it is recommended to wipe the printing plate with a damp cloth before each print to reduce the first layer from not sticking or falling off
2. Pay attention to filament drying. Use AMS to replace desiccant in time to reduce stringing
3. Update the desktop slicer software and mobile APP to the latest version. Update the printer firmware in time
 

For more questions and instructions, please consult customer service or refer to Bambu Official Wiki:
Bambu mobile APP (Bambu Handy) printing tutorial Click to view
Filament and accessories FAQ guide Click to view
Bambu desktop slicer software (Bambu Studio) printing tutorial Click to view