Eagles Band HueForge
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA Silk Gold Transmission Distance: 9.7
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Blue
At layer #15 (1.28mm) swap to Dark Red
At layer #17 (1.44mm) swap to Silk Gold
At layer #19 (1.6mm) swap to Blue Gray
At layer #21 (1.76mm) swap to Jade White for the rest.
You can either go Yellow or Gold.
Sadly my Yellow was to wet to use but the Gold turned out super well.
This was the first band I have ever seen live in concert and I know they get some flak but I love them and I hope you like this next creation of mine
As always the print is thick and good quality. I love how smooth this turned out for myself
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)