3DPrintBunny

cover

2.JPG

plate_1.png

2024-10-07_227d144b4d0e7.jpg

Print at 0.2mm layer height and set wall generator to Arachne

0.2mm layer, 2 walls, 15% infill

lepermessiah

Screenshot 2025-03-10 at 10.59.01 PM.png

IMG_8317_(1).jpeg

IMG_8316.jpeg

IMG_8318.jpeg

This profile allows you to print a layered rainbow rain effect, with white areas where there is no rain. It works with or without an AMS, using manual filament swaps for non-AMS users.&nbsp;For Non-AMS Users&nbsp;Filament swaps are done by adding pauses in the slicer at specific layers. The printer will pause at  the beginning of the specified layer, allowing you to manually change colors.&nbsp;Layer Color Guide for Manual Swaps (Non-AMS):• Layer 1: Purple (Violet)• Layer 40: Navy Blue (Indigo)• Layer 80: Blue• Layer 120: Green• Layer 161: Yellow• Layer 201: Orange• Layer 241: Red• Layer 281: White&nbsp;For AMS Users&nbsp;Using an AMS simplifies the process, requiring only two pauses.1. Start with four colors loaded: Green, Blue, Navy Blue (Indigo), and Purple (Violet).2. Pause at Layer 140 (Green Layer) and swap in Red to replace Blue, Orange to replace Purple, and Yellow to replace Navy Blue.3. Pause at Layer 180 (Yellow Layer) and swap in White to replace Green.Note: Update AMS Color Assignments in the Printer Menu• After swapping filaments, the AMS does not automatically detect the new colors.• You must manually reassign the new colors to their respective slots so the printer tracks them correctly.

Rainbow Rain Print Profile – AMS & Non-AMS Friendly

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

&#39;Safe from the Rain&#39; is a string artwork with a space under the umbrella to slot a figurine of your choice.&nbsp;It prints without supports&nbsp;Print at 0.2mm layer height and if using Bambu Studio set your wall generator to Arachne.&nbsp;You can download the tiny cow in the picture here: https://makerworld.com/en/models/687015#profileId-615717

Print Profile(2)

Description

Comment & Rating (537)

License

Related Models

Safe From the Rain Artwork

Print Profile(2)

Description

Comment & Rating (537)

License

Related Models