58mm Badge Protection Box

This is a protection box for 58mm diameter badges. It needs to be assembled by yourself and you need to purchase the required accessories.

Materials needed for assembly: 8 round magnets with a diameter of 2mm and a thickness of 2.5mm.

A transparent plastic sheet with a thickness of 0.5mm.

When assembling, 4 magnets need to be installed at the four corners of the top cover and the bottom shell (the position has been marked). If necessary, a drill bit with a diameter of 2mm needs to be used to enlarge the hole. The transparent plastic sheet needs to be cut to the same size as the top cover. When installing the transparent plastic sheet, it needs to be installed on the side with magnets!!! (If installed in reverse, it will cause the internal space to become larger, affecting the state of the badge in the box).