Search models, users, collections, and posts
Steampunk Raven Bookmark - Hueforge
IP Report
Print Profile(1)
My Preferred Hueforge Profile, 0.04mm layer
Designer
3.2 h
1 plate
Open in Bambu Studio
Boost
41
123
6
8
40
29
Released
Description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 55x165.92mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Blue Transmission Distance: 4
PLA PolyLite Orange Transmission Distance: 7.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.48mm) swap to Jade White
At layer #30 (1.32mm) swap to Black
At layer #31 (1.36mm) swap to Blue
At layer #32 (1.4mm) swap to Orange
At layer #41 (1.76mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (6)