cheshire
Print Profile(1)
Description
Project: chesire.hfp
Print at 100% infill with a layer height of 0.08 mm and a base layer of 0.16 mm The model is 176x176 mm in size. You can print at higher layer heights below the minimum depth of 0.8 mm. The maximum depth is 2.6 mm and the actual depth is 2.4 mm
Filaments used: PLA PolyLite Black Transmission distance: 0.3
Generic pink PLA Transmission distance: 5 PLA
BambuLab Matte Ice Blue Transmission distance: 3.5
PLA BambuLab Basic violet Transmission distance: 5
This print uses 4 unique filaments. Swap instructions: Start with black On layer # 10 (0.88 mm), switch to pink On layer # 17 (1.44 mm), switch to Ice Blue On layer # 23 (1.92 mm), switch to violet for the rest.
Boost Me (for free)
If you like my work, a boost would help me to continue improving
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)