Stand for Tiny Animals (Zou3d) for Shows / Markets

Edit February 2nd, 2025: 

• Added Shelves with 4 slots which are slightly wider than than 5 slot versions, as per a request. 

• Added 2 files for an inner corner. For example, if you want to round a corner from one table to another, keep shelves connected, and possibly have a continuation of shelves. I opted only to make a connection bracket on the bottom and a top shelf as I think any other parts would likely be useless.
   

  

Edit October 15th: 

• I've added a “MiddleJoint.stl” file which is a double-sided end, this effectively allows you to connect in line as many pieces as you want in a row making 1 consecutive shelving unit. This piece will likely need “on buildplate” supports, and ideally a support specific material like the bambu support for PLA or PETG as an interface layer. 

I created this model to display the collection of Zou3d models that we sell at shows and markets.

Some key points I wanted this model to incorporate:

• No hardware: I wanted this to be something that can be 100% fully 3d printed.
• Easy to assemble: When going to markets, we often have limited time for in/out so I needed something I can breakdown and put together easily. This take about 20 seconds.
• Portability: Since this is modular, its easy for me to throw into a bin and not worry about breakage.
• Flexibility: This design comes with a “Price box” which has 2 stands, and a slide in place system for either tiles, or custom longer plates. The price box is totally optional, and can be omitted if you don't want it.

I originally tried to incorporate a 5th tier, but it was simply too squished to work if I wanted to stick to making this a Bambu-compatible print.

Configurations:

Stand w/ Price Box

1. Print 1x RightSideWall, 1x LeftSideWall, 3x Shelf and 1x TopShelfWithPriceStandsSlot
2. Print PriceSignBox and either the Long or Short PriceHangerPole's.
3. Fit the sides into the bottom shelf
4. Fit the top shelf
5. Slide the remaining 2 shelfs into the grooves until they can go no further back, then drop them into place.
6. Fit the two Price Hanger Poles into the slots on the top shelf.
7. Slide the “Price box” onto the two Price hanger poles
8. Print either your own custom price tiles, or price slider with your custom pricing and wording. (I may in the future include a variety of pre-made tiles for mix/match)

Stand (No Pricing) - Assembly:

1. Print 1x RightSideWall, 1x LeftSideWall and 4x Shelf
2. Fit the sides into the bottom shelf
3. Fit the top shelf
4. Slide the remaining 2 shelfs into the grooves until they can go no further back, then drop them into place.

Printing Profiles:

I've just used a .24 layer height “Draft” setting in Bambu labs. This honestly comes out looking great, and I don't think any finer resolution is needed so that's what was uploaded, but by all means feel free to print how you think looks best.

Quick Assembly Video: 

https://www.tiktok.com/@makeitgeeky/video/7424208892063796485?lang=en