Magnetic 3D Marker Scanning Tracker Dot
Print Profile(1)
Description
A 3D Marker dot to be used with a 3D Scanner. Easy mounting on magnetic surfaces/flat surfaces. Reduces waste/cost of always disposing of markers after a single use.
Most materials will work fine, I would recommend the support on the underside but if you are confident in your overhands you may be fine without.
I added a little chamfer to the bottom so it's easy to remove. The small magnets give you a good hold without being impossible to take off or move.
I also have other shapes on my page. Here is the collection of other marker types:
https://makerworld.com/en/collections/2698008
Boost Me (for free)
If this helped I would appreciate a boost! Thanks:)
What you need besides the print (per dot):
- 1x 10x6mm Reflective Markers (example 1000pcs from Aliexpress)
- 1x 4x1mm Diameter Magnet (got a bunch for cheap from Aliexpress)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (20)