Search models, users, collections, and posts
TD-1 Self-Source
IP Report
Print Profile(2)
0.2mm layer, 4 walls, 15% infill
Designer
3.2 h
3 plates
FOR A1 with TOP MOUNT AMS 0.2mm layer, 4 walls, 15% infill
2.4 h
2 plates
Open in Bambu Studio
Boost
126
221
141
111
694
504
Released
Description
This is the current files for the TD-1 design. If you wish to self-source and build one of these, you can access all the files needed through my Patreon. https://patreon.com/AJAX_3D
EDIT 1/4/2025:
Release version 1.5. Changes include:
- Changed the sensor mount height to 11.8 to correct some issues some have had with button not triggering correctly.
- Added more clearance for solder joints where they rest against printed parts.
EDIT 7/17/2024:
Changed the following:
- Changed the geometry of the filament paths to allow for more tolerance in non-critical areas.
- Increased tolerances around the display as many have had issues with glass breakage.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (141)