Search models, users, collections, and posts
Print Profile(2)
0.1mm layer, 1 walls, 100% infill
Designer
2.9 h
1 plate
0.1mm layer, 1 walls, 100% infill
2.7 h
1 plate
Open in Bambu Studio
Boost
980
2016
253
171
3.1 k
1.6 k
Released
Description
Content has been automatically translated.
This is a transparent cube printed following the Printing tips for transparent PETG | Bambu Lab Wiki, where you can clearly see a dolphin in the middle of the cube.
Considerations
- At the very bottom, there is a base with a height of 0.4mm, its purpose is to prevent fogging on the bottom surface when the model is removed from the printing plate, the base is best made of PLA material, if you are confident in your printing plate, you can also delete it.
- If using AMS printing, please ensure that the purge volume is > 600. If there is no AMS, you can also set pauses in the slicer software to switch materials, remember to purge more.
- It is best to test according to the wiki above before printing, pre-drying the PETG filament will have a good improvement.
- Please do not enable flow calibration.
- FDM printing transparent effects is not easy, please treat it as a fun attempt.
Other Crystals
Follow me, there are other beautiful crystals on my homepage.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (253)