One Piece - God Usopp Wanted Poster
Print Profile(1)
Description
Boost Me (for free)
Hi! If you like what I do and have an unused Boost, it would go a long way towards me being able to produce more anime Hueforges more rapidly!
These One Piece wanted posters have a ton of texture and a light metallic shine to them!
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
The Model is 153.86x229.99mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 3mm and the Actual Depth is 3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Bambu Metal Copper Brown Transmission Distance: 0.5
PLA Bambu Basic Gold Transmission Distance: 2.8
PLA Zyltech Milky White Transmission Distance: 9.5
PLA PolyLite Orange Transmission Distance: 6.2
PLA Bambu Metal Iridium Gold Transmission Distance: 1
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #25 (1.2mm) swap to Copper Brown
At layer #44 (1.96mm) swap to Gold
At layer #47 (2.08mm) swap to Milky White
At layer #50 (2.2mm) swap to Orange
At layer #52 (2.28mm) swap to Iridium Gold
At layer #53 (2.32mm) swap to Milky White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)