Tape Hanger/Holder (Parametric)
Print Profile(1)
Description
Parametric hanger for your rolls of tape, designed to be stucked on the vertical surface with 25mm double-sided tape.
No support, prints on the side.
You can adjust the parameters in Fusion to generate a hanger for your specific needs, parameters are:
- TapeWidth - the width of the roll of the tame, as measured
- TapeWidthClearance - clearance added to the width, 2mm by default
- RollDiameter - the inner diameter of the roll, for big rolls it's usually 75mm
- LipSize - the size of the lip, that does not allow the roll to slip of the hanger, 5mm by default
- ScotchWidth - width of the double-sided tape used to stick the hanger to the wall, by defalt 25mm
The models for the sizes I found around my house are available: (TapeWidth x RollDiameter)
- 50x75 - the most common wide roll of tape
- 25x75 - also very common narrower size
- 24x75 - some rolls of foamy double sided tape are 24mm in width, but you can use 25x75 model instead
- 19x40 - electrical tape
- 19x32 - electrical tape
- 9x75 - Kapton tape
Embossed size on the top is generated with Parametric Text Fusion 360 plugin https://parametrictext.readthedocs.io/en/stable/parameters.html
You might need to install it, or just update the text manually.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)