DJI Action Bag Clip
Print Profile(2)
Description
Online ones are too expensive, so I printed my own. I added a pause layer to the settings, and need to embed nuts (if they work properly). If you are not sure, please open it from your computer and manually confirm. The supports are very easy to remove with the default parameters.
To prevent thread stripping, I used a press fit for the screw holes and hammered them in with something underneath. The spherical head and middle part of the clip have been filled with solid infill, while the rest is 40% spiral infill. I used PETG for printing, and the pea clamp will deform slightly when tightened.
Screws and nuts: One set of M5*35 hex head screws and nuts (around 80 cents per 10 sets on Taobao, with free shipping for first purchase).
One set of M5*45 hex head screws and nuts (around 1 yuan per 10 sets on Taobao, with free shipping for first purchase).
Documentation (2)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)