Mc2.project3D

cover

prima.jpg

2 mont post.jpg

ag.jpg

1g.jpg

2g.jpg

6g.jpg

7g.jpg

9g.jpg

plate_1.png

5793998839395501177.jpg

Complete&nbsp;0.12mm layer, 3 walls, 100% infill&nbsp;0.12mm layer perfect quality3 walls for excellent adhesion100% infill greater weight and resistance

X3 pieces - Z axis protection

HALF Z axis protection 0.12mm layer, 3 walls, 100% infill&nbsp;Create your favorite combination

HALF Z axis protection

5787652724571704100.jpg

Print this to have the complete end stop, I removed 1.6 mm from the original0.2mm layer, 2 walls, 15% infill

Full Extension

gsxr84_2001

20250420_142531.jpg

20250420_142948.jpg

20250420_142959.jpg

Stampato in PETG4 walls, 6 top e 4 bottom. Riempimento Zig Zag e modalità arachne Dopo aver incastrato la prima metà, bisogna fare un pò di forza per far entrare la seconda. Ma l&#39;adesione è ottima! Una volta entrati in sede non si muovono minimamente e coprono completamente il cuscinetto

Printed in PETG4 walls, 6 top and 4 bottom layers. Zigzag infill and Arachne mode After fitting the first half, a little force is needed to insert the second. However, the adhesion is excellent! Once in place, they remain perfectly secure and completely cover the bearing

PETG, 4 walls, 6 top, 4 bottom, Arachne, Zig Zag, 15%

JOLKA

IMG_20241014_164906084_AE.jpg

IMG_20241014_202836000_AE(1).jpg

3 Pieces<ul><li>0.16mm layer height</li><li>4 wall loops</li><li>100% Rectilinear infill</li><li>Slowed down initial layer speeds for better adhesion</li></ul>

3 Pieces - 0.16mm layer, 4 walls, 100% infill

user_340552603

IMG_20241216_134730.jpg

IMG_20241216_134751.jpg

Changed for speed and Strength2 walls, 5 top layers, 3 bottom.x1c, but should be good for the p1p, p1s

0.2mm layer, 2 walls, 15% infill

MagnetDanny

WhatsApp Image 2024-10-16 at 12.13.41.jpeg

WhatsApp Image 2024-10-16 at 12.13.41 (1).jpeg

WhatsApp Image 2024-10-16 at 12.13.42 (1).jpeg

WhatsApp Image 2024-10-16 at 12.13.42.jpeg

WhatsApp Image 2024-10-16 at 12.13.43.jpeg

<ol><li>Top Shell Layers: Increased from 5 to 6 layers for a smoother top surface by giving more material for ironing to work with.</li><li>Bottom Shell Layers: Reduced from 5 to 4 layers since the bottom doesn’t need as much attention, saving material and print time.</li><li>Sparse Infill Density: Lowered from 100% to 15%. to reduce material use, yet it is still providing enough support for a smooth top.</li><li>Line Widths: Set all wall and top surface line widths to 0.4mm (to match the nozzle size) for better consistency and smoother results.</li><li>Ironing Flow: Increased to 13% to fill small gaps and improve the smoothness of the top surface.</li><li>Ironing Line Spacing: Reduced to 0.1mm for more passes and a finer finish on the top surface.</li><li>Ironing Speed: Slowed down to 20 mm/s to give more time for smoothing.</li><li>Ironing Pattern: Switched to Concentric for a better finish on curved surfaces.</li></ol>

Smooth top with less material - 0.12mm, 3 Walls, 15% Infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Your contribution is my fuel for my projects, thanks</boostcontent></boostme>I designed these covers because dirt always accumulates in my printer compartment, they keep the bearing clean.&nbsp;These covers were created so that they can be removed or lifted to lubricate the bearing or grease the worm gear.&nbsp;Review of 04-11-2025 dd-mm-yyyy<h4>I have added a print profile for those who want to reach all the way to the end of the print bed. I removed 1.6 mm from the original and did the tests.</h4><h3>They do not create any obstacles to the printer.</h3><figure class="image image_resized" style="width: 64.74%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000701002/design/2024-10-13_71c8f74e52e0a.gif"></figure>&nbsp;PROBLEM TO BE SOLVED: The printer started to squeak, the grease and the bearing didn&#39;t get along with the dirt I created.<figure class="image image_resized" style="width: 71.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000701002/design/2024-10-13_01659c9df141.jpg"></figure>&nbsp;PROJECT: Fusion 360 I did various tests to make everything so precise, i kept the inclination of the printer so as to have a better aesthetic.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000701002/design/2024-10-13_c7fc944b64ce3.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000701002/design/2024-10-13_4478433e9781d.png"></figure>&nbsp;PRINT SETTINGS:Print it with any material, I used Bambu material.-Ugello 0.4mm-Layer height 0.12mm -No Supports-100% filling-3 Walls&nbsp; ASSEMBLY:The joints are held by the offsets given by the screws and the assembled pieces.&nbsp;I cleaned everything, removing excess grease, put the grease directly on the worm screw&nbsp;&nbsp;<figure class="image image_resized" style="width: 74.72%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000701002/design/2024-10-13_84e75ac700524.gif"></figure>&nbsp;Note: with a little patience you will be able to mount the covers also on the screw at the back.<figure class="image image_resized" style="width: 70.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000701002/design/2024-10-13_7d763aee3a46b.jpg"></figure><figure class="image image_resized" style="width: 69.53%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000701002/design/2024-10-13_fa5d2c9c8ba33.jpg"></figure>&nbsp;DISASSEMBLY:Very simple to dismantle the protection, to be able to carry out maintenance or an aesthetic change if you like.To carry out maintenance, I personally raise the protection and lubricate.<figure class="image image_resized" style="width: 77.51%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000701002/design/2024-10-26_7e315694deb2.gif"></figure> <a target="_blank" rel="noopener noreferrer ugc" href="https://www.patreon.com/c/Mc2_project3D">https://www.patreon.com/c/Mc2_project3D</a> Happy printing, if you like follow me for other projects.&nbsp;See you next time from MC2.project3D&nbsp;

Print Profile(7)

Bill of Materials

Description

I have added a print profile for those who want to reach all the way to the end of the print bed. I removed 1.6 mm from the original and did the tests.

They do not create any obstacles to the printer.

Comment & Rating (7603)

License

Related Models

Z-axis bearing protection