Search models, users, collections, and posts
Halloween - Death 2 - Hueforge
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
3.8 h
1 plate
Open in Bambu Studio
Boost
16
23
6
0
12
10
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
- PLA BambuLab Basic Black Transmission Distance: 0.6
- PLA BambuLab Basic Gray Transmission Distance: 2
- PLA BambuLab Basic Jade White Transmission Distance: 5
- PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
- Start with Black
- At layer #8 (0.72mm) swap to Gray
- At layer #16 (1.36mm) swap to Jade White
- At layer #20 (1.68mm) swap to Red for the rest.
You can customize the eye color by swapping the Red filament at Layer#20 out for the filament of your choice. I've posted a second print I did using BLL PLA Glow filament, to give the eyes an eerie nightime glow effect!
If you scale the print, please do not scale the Z axis!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (6)