Mini airplane 10.0 - whit launcher
Print Profile(3)
Bill of Materials
Description
Edit:
Added elevators on large wings. Aircraft is now more stable for hand throw.
The print settings remain the same. New STL - mini letadlo 10.1, New 3MF - mini letadlo 10.1
Version miniairplane 10.0 this time in the shape of a fighter.
The wings must be printed on 3 layers for better strength, so the first layer is set to 0.12mm and the next layers to 0.08mm. This setting has worked for me several times.
the front wings must be bent and then straightened to approx. 15° (see photo)
Bend the rear wings to approx. 80° (see photo). This has worked best for me to fly correctly. The inner fill of the model is set to 70%.
Before removing the model from the printing mat, wait for it to cool down, the miniairplane is easier to remove and the wings will not be crooked.
You can also use the included launcher
For the launcher, you can also use a coarser rubber than the one listed, unfortunately I don't have another one at home, but it works with a small rubber
Check out my other models: https://makerworld.com/en/@Marek69
Boost Me (for free)
If this model inspires you, I'd be happy for a boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (115)