Modular Hydroponic Tower V2 (with *.3mf file)

This modular model of a hydroponic tower is designed to be printed on any printer with a printing area of 256mm x 256mm x 256mm.
I provide the STEP formats so they can be modified to your liking. Please use PETG.

Printing does not require any support if oriented correctly.

For the pumping system you can use any submersible source, aquarium or cat water pump. The flexible hose to connect the pump to the upper diffuser is 1/4 inch (outer diameter). You can route the hose using the internal guides of the modules.

I recommend joining the modules with M2 stainless steel screws. You should make the holes with a drill at the intersection between the upper tab of the lower module and the lower tab of the upper module. A pair of screws per tab will be sufficient to secure the modules and prevent the tower from accidentally disassembling easily.

The upper water diffuser is divided into two parts so that it can be printed without supports. When assembling it, apply silicone to glue both parts and prevent water leaks.