Print Profile(3)
Bill of Materials
Description
I’ve made this model free for personal use, so if you like my design and want to support my work or get commercial license you can support me on Patreon It helps me a lot on my dream of making this my full time job.
If you share the print tag me on Instagram @Aeki3d, love seeing your takes on the design !!
V2
Corrected a double wall problem induced by modifier placements
After I’ve knocked down my mug full of coffee for the third time, I realized I had to do something.
That’s how I came up with this design of a mug holder. And of course I had to make an alien like design.
this mug holder will fit even big mug up to 95mm diameter, it'll also fit table ranging from12mm thick to 40mm
It has 4 parts, a body that hold everything together, a mug holder part thingy and a screw system that hold everything in place.
The main part has to be printed at an angle on the flat face at the front of the part like this:
also, to avoid delamination at the clamp system, be sure to add some walls and a 40% infill, I’ve done it through a modifier, but you can do the whole part like that if you don’t care.
The print profile already have this feature implemented.
I’ve included the print file that should be ready to print on bambu or orca slicer
Let me know if you have any problem or suggestions.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2041)