Enclosures for the A1
Print Profile(1)
Description
I have engineered a supremely robust enclosure for the A1. This “strength” refers to its structural integrity and load-bearing capacity. Calculations indicate it can easily withstand a ton.
The enclosure dimensions are based on official VIKI calculations:
Because the enclosure is sizable, I sought to avoid wasted space, maximizing utility.
Therefore, from the outset, I designed the upper section for added functionality, demanding significant load-bearing capability.
The printer’s placement was thoughtfully considered, opting for floor placement for stability and reduced noise and vibration.
Given the printer’s low profile, an acrylic top panel facilitates easy monitoring.
Aluminum composite paneling is used on the sides and bottom, enhancing internal illumination when the top light is activated.
For air purification, I incorporated two purifiers: one for internal recirculation, the other for external.
The external purifier is a Xiaomi car air purifier, readily available for a few tens of dollars (ensure it lacks an RFID chip).
The internal purifier is custom-built, drawing inspiration from my other project: Simplified Air Purifier by david - MakerWorld
The filament spool holder is custom-designed to avoid the base profile, see: A1 Filament Spool Holder Self-Locking Version by david - MakerWorld
2D drawings for the acrylic panels are provided. If the top air purifier is omitted, consider a 700*700 standard panel for cost savings.
The LED lighting utilizes a DIY power bank with user-installed cells, offering months of use on a single charge.
The following bill of materials is provided (additional corner brackets, screws, and nuts are recommended):
2020 Profile 640mm * 4
2020 Profile 690mm * 14
2020 Profile 600mm * 6
2020 Profile 160mm * 2
2020 Corner Brackets 58
M4*8 Screws 126
M4*12 Screws 8
2020 T-Nuts 134
Self-Tapping Screws ST4*10 2
Acrylic Panel 700*700*5mm 1 (Standard, undrilled panel if air purifier is omitted)
Acrylic Panel 599*344*5mm 2 (Pre-drilled panel, diagram included)
Aluminum Composite Panel 1m * 3m * 3.6mm
2020 Hinges 4
Magnets 4*6*10mm 2
Xiaomi Car Air Purifier 1 (External circulation, cooling)
Custom Simplified Air Purifier 1 (Internal circulation, pre-filtration)
LED Light 1
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)