Carolina Tarheels Mascot
Print Profile(1)
Description
Boost Me (for free)
Please boost if you enjoy our prints It helps us buy supplies and equipment.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.88mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Numakers Pitch Black Transmission Distance: 1.6
PLA+ Numakers Lemon Yellow Transmission Distance: 11
PLA+ Numakers Teal Blue Transmission Distance: 4.8
PLA+ Numakers Pure White Transmission Distance: 4.8
This print uses 4 unique filaments
Swap Instructions:
Start with Pitch Black
At layer #12 (1.04mm) swap to Teal Blue
At layer #19 (1.6mm) swap to Pitch Black
At layer #21 (1.76mm) swap to Lemon Yellow
At layer #23 (1.92mm) swap to Teal Blue
At layer #25 (2.08mm) swap to Pure White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)