Display case
Print Profile(2)
Bill of Materials
Description
As I couldn't find anything that suited my needs, I made the display cases myself.
40x20 cm exterior and flexible in height.
Interior approximately 37x17 cm area.
A back panel made of 6mm material is required (I used facade panels for mine).
And sides made of 4mm, for example, Plexiglas, which is also used for the front.
Connectors are included for the shelves. Everything is for gluing.
The dimensions are also suitable for printers with only a 20x20 building area.
The height needs to be increased by 10mm and the front needs to be increased by 9mm for the groove.
I have taken photos with multiple models to show how large the area is, my height is 14.5 cm inside.
I have made matching tenons so that you can also create multiple display cases on top of each other without them sliding.
A version with 20x20 cm was also added for smaller models.
Widths for panels:
Back panel: 38.3 cm
Side: 17 cm
Front: 38.5 cm
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)