Search models, users, collections, and posts
Print Profile(1)
0.1mm layer, 1 walls, 100% infill
Designer
2.8 h
1 plate
Open in Bambu Studio
Boost
101
254
19
11
382
189
Released
Description
Content has been automatically translated.
This is a transparent cube printed following Printing tips for transparent PETG | Bambu Lab Wiki, you can clearly see a jellyfish in the middle of the cube.
注意事项
- There is a 0.4mm base at the bottom. Its purpose is to prevent fogging of the bottom surface when the model is removed from the printing plate. It is recommended to use PLA material for the base. If you are confident with your printing plate, you can also delete it.
- If using AMS printing, please make sure the purge volume > 600. If there is no AMS, you can also switch materials by setting the pause in the slicer software. Remember to purge a bit more.
- It is recommended to test according to the wiki above before printing. Pre-drying the PETG filament will improve the printing quality.
- Please do not enable flow calibration.
- FDMs printing transparent effect is not easy, please treat it as a fun attempt.
其他水晶
Follow me, there are other beautiful crystals on my homepage.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (19)