Patrice

cover

Capture d’écran 2024-10-18 à 08.29.16.png

Capture d’écran 2024-10-18 à 08.29.44.png

IMG_2101.jpeg

IMG_2102.jpeg

IMG_2103.jpeg

IMG_2104.jpeg

IMG_2105.jpeg

IMG_2106.jpeg

IMG_2107.jpeg

IMG_2108.jpeg

plate_1.png

plate_2.png

user_4147030425

IMG_0713.jpg

IMG_0714.jpg

<ul><li>Schichthöhe 0,20 mm</li><li>4 Perimeter, 5 obere / 3 untere Schichten</li><li>Fülldichte 15 %, Muster Gyroid</li><li>Brim 8 mm für bessere Haftung</li><li>Supports: Baum (Auto), Winkel 50°</li><li>Material: PETG HF @ 255 °C / Bett 80 °C</li><li>Drucker: Bambu Lab P1S</li><li>Optimierte erste Schicht (Z-Offset +0,02 mm empfohlen)</li><li>Für hohe Festigkeit und glatte Oberflächen angepasst</li></ul>Getestet, stabiler Halt und saubere Unterseite – ideal für Wandhalter, Besenhalter &amp; Werkstattzubehör.

<ul><li>Layer height 0.20 mm</li><li>4 perimeter, 5 top / 3 bottom layers</li><li>Infill density 15 %, Pattern Gyroid</li><li>Brim 8 mm for better adhesion</li><li>Supports: Tree (Auto), Angle 50°</li><li>Material: PETG HF @ 255 °C / Bed 80 °C</li><li>Printer: Bambu Lab P1S</li><li>Optimized first layer (Z-Offset +0.02 mm recommended)</li><li>Adapted for high strength and smooth surfaces</li></ul>Tested, stable hold and clean underside – ideal for wall mounts, broom holders &amp; workshop accessories.

Broom Holder PETG @0.2 mm (4 Walls, Brim 8 mm)

Brackets that allow you to store brooms, in my I installed it in the laundry room, the brackets will find their place in a cupboard or even fixed on a door.They are made of white ABS from Bambu Lab with the original parameters. As a printer I used a Bambu Lab P1S.

Broom holder

ASIA

Print Profile(1)

Description

Comment & Rating (4)

License

Related Models