The Southern Floor of Gale Crater

Download and 3D Print a Stunning Mars Landscape!

Step into the extraordinary landscape of Mars with this 3D model, captured by the HiRISE instrument aboard NASA’s Mars Reconnaissance Orbiter. This breathtaking image shows The Southern Floor of Gale Crater, a region rich with geological history and planetary mysteries.

Image source: NASA/JPL-Caltech/UArizona

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Jade White Transmission Distance: 5
 

This print uses 4 filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #14 (1.2mm) swap to Ice Blue
At layer #19 (1.6mm) swap to Jade White for the rest.

Created with the tool HueForge