Mayan death whistle keychain - Aztec

This is the remixed popular Mayan death whistle.

It is much smaller and has an added loop so it can be carried as a keychain.

Size: 36x44x32mm (the size of a golf ball)

Let me know how the print goes.

No post-processing is required. If you notice any stringing, you can clear the air hole manually with a small drill bit it will improve the sound.

A few tips for good sound: 

- Hold it by the sides of the head. 

- Back and bottom holes should not be covered. 

- Blow as hard as you can and adjust the angle a bit to produce the best sound. 

For some people, the sound isn't good. 

- Try the second profile which is slower.

- Dry your filament 

-  If using other filaments than babulab then make sure to calibrate flow before print. 

- Sometimes there is just a tiny error while printing which changes airflow, it's just the nature of these printers and the model is pretty small. Give it another go, maybe try a different filament and a slower profile. I have printed a lot of these whistles and even when printed on the same bed each could produce a slightly different sound. 

Donate Filament?

If you'd like to support my 3D printing projects beyond Maker World points, donations are welcome but entirely optional! Your downloads, prints, boosts, and kind words mean the world to me. Feel free to DM or comment (especially if you donate) so I can thank you—it really keeps me motivated!