Cute Travel Frog_Take your frog,continue the trip!

旅かえる

• This model was inspired by the 育成 game “Traveling Frog”, where players prepare their frog’s travel package and lunch box items. The frog will send postcards and travelogues to the player at any time. Now, the Traveling Frog is “home” and you can take it on a journey (by printing one).

• Initially, there are two configurations:

  ① Monochromatic Traveling Frog

  ② Multi-color Traveling Frog (Multi-color printing allows you to print several on a single plate, thus maximizing efficiency and minimizing waste generated by purging)

• The initial configuration has an outer contour size of 56.8X50X52.8mm. Do not change the printing configuration arbitrarily. If you need to scale or make other changes, you can mention it in the comments section. I will try to slice and check it according to your requirements. This can lower the probability of printing failures. This is for a better printing experience for everyone and to prevent personal settings from being misconfigured and resulting in low scores for the model.

• The printing support is simple and easy to remove. The support has been adjusted to be in a relatively optimal state with the printing configuration.

• If you are concerned about the stability of the first layer printing, you can enable the brim function.

• 0.2 layer height,and enable variable layer height, the printing effect is good. It is recommended to print at 100% of the original speed.

• If the printing overhang quality is not ideal, pay attention to heat dissipation! Pay attention to flow calibration and material drying!

3D Printing Tips and Preparation Precautions

(Most of the models released by creators have been tested and can adapt to all models. Many times, printing problems occur and you need to check if your printer and materials are working properly. This is a skill you need to learn to play with 3D printing. If you have any problems, you can also discuss them actively in the comment section. This is the meaning of building such a community)

I have made some notes below, and you can ask customer service or check the Bambu Wiki for more questions. You can learn a lot from it.Print Quality and Troubleshooting | Bambu Lab Wiki

• Make sure the print plate is clean. It is recommended to clean the print plate regularly! Oil residue on your hands after touching the print panel can greatly reduce print adhesion. At the same time, debris from previous prints and tiny remnants of prints will also affect the quality of the first layer, thereby reducing the yield rate.
• Pay attention to material drying, which will greatly affect your printing quality and printing experience! Materials that have been stored for a long time will inevitably become damp. If stringing occurs, it is recommended to inquire about the drying parameters from the manufacturer to dry the material. At the same time, most manufacturers do not dry their materials before they are shipped. Therefore, our newly unsealed materials are still a little damp. It is also recommended to dry them before use.
• When using materials from a new manufacturer, it is recommended to start printing immediately and calibrate the material flow. This will greatly affect your print quality and is a necessary process for adapting the new materials to your printer.
• If you encounter a problem where the print quality suddenly deteriorates and the yield rate is low, check if the nozzle is clogged. You can also try recalibrating the printer.
• Print at the recommended print speed in the model description. Overhang quality is directly related to print speed, an appropriate speed (too fast or too slow is not good) will allow the material more time to cool and form as it is deposited.
• Set the bed and nozzle temperature according to different materials. Too high or too low a temperature can lead to warping, layer deformation or adhesion problems, thereby affecting print quality and success rate.